Hand Washing

Adaptor Plate and Auto Sensor

For our existing clients who have the Original Auto Sensor we have created an adaptor plate which comes pre-drilled and marked for fixing, together with drill bit and screws.

This facilitates the economical continued use of the backplate and wash basin by removing the Original Auto Sensor and replacing it with the new model.

find out more

Auto Sensor

The Autoflo Auto sensor is the heart of the hand wash systems. Present throughout the range the auto sensor provides touch free technology, combining water and electric to produce a perfect hand wash water temperature instantly.

The auto sensor can be installed complete to existing systems to provide touch free hand washing with ease, and excellent value for money.

Installation could not be easier with direct connections to a mains water supply using standard 15mm pipework. The electrical connection requires a rear cable entry.

Find Out more

Hygiene Hand wash Station

The Hygiene Hand wash Station combined with the Auto sensor provides a perfect solution for touch-free hand washing.

Manufactured using Acrylic capped ABS for the rear backplate and sink which are bonded together to provide a very high quality product, combining strength and impact resistance.

All areas are shaped to prevent water, dirt and germ traps.

find out more

Stainless Steel Hygiene Hand wash Stations

The Stainless Steel Hygiene Hand wash Station combined with the Auto sensor provides perfect touch-free hand washing.

Manufactured using 240S Grit finish – 304 grade stainless steel making it an ideal solution in an application where strength and durability is required.

All welds are ground and polished finished.

Available as Single, Two, Three and Four station options.

find out more

Mobile Hygiene Handwash Station

Combining the Autosensor with an inbuilt pump, fresh and waste water containers, this totally Mobile Hygiene Handwash Station offers the ultimate ‘go anywhere’ solution to avoiding cross contamination between products.

The frame is manufactured using 25mm x 25mm stainless steel tube. The sides and front, which are fully removable, along with the back are made from Acrylic Capped ABS sheets.

The Unit is fitted with two fixed and two swivel castors for ease of mobility.

Find Out more

Portowash WU4 Hygiene Handwash Station

The Portowash WU4 Hygiene Handwash Station combines the Autosensor with an integral pump that sits at the rear of the unit hidden from view.

This product is commonly used in applications where there is no main supply of water but an electrical connection from the mains or generator is available which will operate the handwash.

The water connection is via a pipe which has a filter to protect the pump from debris ingress from a tank or suitable container.

A stainless steel frame is attached to the backplate which increases the depth of the unit by 50mm to accommodate the pump.

Find Out more

Portowash WU5 Hygiene Hand wash Station

The Portowash WU5 Hygiene Hand wash Station combines the Auto sensor providing a touch-free Hand wash for temporary or semi permanent applications.

The WU5 comes with full electrical protection to all areas and is used where there is a permanent supply of fresh running water and a 13amp electrical supply.

An option of a PIR light can be fitted to the unit if required.

Image three shows typical WU5 installation in a portable toilet.

Find Out more

AVS Hand wash

The AVS Hand wash has been designed to be used specifically in conjunction with a foot pump operated hand wash found in a portable toilet application.

The Unit comprises of an Acrylic Capped ABS backplate combining hand wash, light and enclosure containing full RCD and MCB electrical protection.

Find Out more

Type 1 Stainless Steel Handwash

The Type 1 Stainless Steel Handwash combines the Autosensor and an integral pump providing a touch-free Handwash for temporary or semi permanent applications.

Manufactured using 240S Grit finish – 304 grade stainless steel making it an ideal solution in an application where strength and durability is required.

This product is commonly used in applications where there is no main supply of water but an electrical connection from the mains or generator is available which will operate the handwash.

The water connection is via a pipe which has a filter to protect the pump from debris ingress from a tank or suitable container.

Image two shows typical Type 1 Stainless Steel Handwash installation in a portable toilet.

Find Out more

Type 2 Stainless Steel Handwash

The Type 2 Stainless Steel Handwash combines the Autosensor and an integral pump providing a touch-free Handwash for temporary or semi permanent applications.

A continuation of the TYPE 1, the TYPE 2 is a complete stand alone unit. With a 35 litre fresh water tank & HSE compliant forearm bowl this pumped unit is ideal in a toilet or isolated location where strength and durability are key factors.

The integrated forearm bowl combined with the 3kw Autosensor ensure that this unit complies with all aspects of the HSE guidelines set out in (The provision of welfare facilities at transient construction sites) please see the technical specifications for further information.

Find Out more